60.383 CVE tracked
809 Exploited now
188 Used by ransomware
Last sync
CVE Tracker
60.383 CVE
Ten vendors followed by CPE identifier, not by keyword: a CVE appears here once NVD says which products it affects — usually a few days after it is published.
| Identifier | Severity, sort descending | Product and flaw | EPSS, sort descending | In KEV since, sorted descending |
|---|---|---|---|---|
| CVE-2025-22108 | HIGH 8.6 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Mask the bd_cnt field in the TX BD properly The bd_cnt field in the TX BD specifies the total number of BDs for the TX packet. The bd_cnt field has 5 bits and the maximum number su | 0.4% | — |
| CVE-2025-22107 | HIGH 7.1 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix kasan out-of-bounds warning in sja1105_table_delete_entry() There are actually 2 problems: - deleting the last element doesn't require the memmove of elements [i + 1 | 0.2% | — |
| CVE-2025-22106 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So | 0.2% | — |
| CVE-2025-22105 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns | 0.2% | — |
| CVE-2025-22104 | HIGH 7.1 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Use kernel helpers for hex dumps Previously, when the driver was printing hex dumps, the buffer was cast to an 8 byte long and printed using string formatters. If the buffer size wa | 0.2% | — |
| CVE-2025-22103 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace | 0.2% | — |
| CVE-2025-22102 | HIGH 7.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix kernel panic during FW release This fixes a kernel panic seen during release FW in a stress test scenario where WLAN and BT FW download occurs simultaneously, and d | 0.2% | — |
| CVE-2025-22101 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix Tx L4 checksum The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol. There was a bug to set Tx checksum flag for the other protocol that results in Tx rin | 0.2% | — |
| CVE-2025-22100 | HIGH 7.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix race condition when gathering fdinfo group samples Commit e16635d88fa0 ("drm/panthor: add DRM fdinfo support") failed to protect access to groups with an xarray lock, which | 0.1% | — |
| CVE-2025-22099 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init devm_kasprintf() calls can return null pointers on failure. But some return values were not checked in zynqmp_audio_init(). Add | 0.2% | — |
| CVE-2025-22098 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set() Instead of attempting the same mutex twice, lock and unlock it. This bug has been detected by the Clang thread-safety analyzer. | 0.2% | — |
| CVE-2025-22097 | HIGH 7.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix use after free and double free on init error If the driver initialization fails, the vkms_exit() function might access an uninitialized or freed default_config pointer and it m | 0.2% | — |
| CVE-2025-22096 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: Fix error code msm_parse_deps() The SUBMIT_ERROR() macro turns the error code negative. This extra '-' operation turns it back to positive EINVAL again. The error code is pass | 0.2% | — |
| CVE-2025-22095 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: PCI: brcmstb: Fix error path after a call to regulator_bulk_get() If the regulator_bulk_get() returns an error and no regulators are created, we need to set their number to zero. If we don' | 0.2% | — |
| CVE-2025-22094 | HIGH 7.3 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 prov | 0.2% | — |
| CVE-2025-22093 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid NPD when ASIC does not support DMUB ctx->dmub_srv will de NULL if the ASIC does not support DMUB, which is tested in dm_dmub_sw_init. However, it will be dereferenced | 0.2% | — |
| CVE-2025-22092 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: PCI: Fix NULL dereference in SR-IOV VF creation error path Clean up when virtfn setup fails to prevent NULL pointer dereference during device removal. The kernel oops below occurred due to i | 0.2% | — |
| CVE-2025-22091 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix page_size variable overflow Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to unsigned long to support values larger than 31 and avoid overflow. For examp | 0.2% | — |
| CVE-2025-22090 | HIGH 7.3 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range() If track_pfn_copy() fails, we already added the dst VMA to the maple tree. As fork() fails, we'll cleanup the maple tre | 0.2% | — |
| CVE-2025-22089 | HIGH 7.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") accidentally almost exposed hw counters to | 0.2% | — |
| CVE-2025-22088 | CRIT 9.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Prevent use-after-free in erdma_accept_newconn() After the erdma_cep_put(new_cep) being called, new_cep will be freed, and the following dereference will cause a UAF problem. Fix | 0.5% | — |
| CVE-2025-22087 | HIGH 7.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: bpf: Fix array bounds error with may_goto may_goto uses an additional 8 bytes on the stack, which causes the interpreters[] array to go out of bounds when calculating index by stack_size. 1 | 0.2% | — |
| CVE-2025-22086 | HIGH 8.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we a | 0.3% | — |
| CVE-2025-22085 | HIGH 7.8 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use-after-free when rename device name Syzbot reported a slab-use-after-free with the following call trace: ================================================================== | 0.2% | — |
| CVE-2025-22084 | MED 5.5 | linux linux_kernel In the Linux kernel, the following vulnerability has been resolved: w1: fix NULL pointer dereference in probe The w1_uart_probe() function calls w1_uart_serdev_open() (which includes devm_serdev_device_open()) before setting the client ops via serdev_device_ | 0.2% | — |